How to setup your WiFi with Firmware settings.
If you have a Windows PC:
Go to Start > Run
after that you will get a Dos Promt.
typ in the black window:
you will get a list with your IP configuration.
Now boot up your NDS and run a commercial game (like mariokart) and go to the
Choose a wifi slot. (the working one you already have in your list)
Now you'll see some things like:
Now we need the information from the PC we just entered in the DOS Prompt.
the things you will have to change on your DS are:
*Auto obtain IP: NO
*IP address: put the numbers in like you see it on the Dos prompt on the pc, in
your DS.. but change the LAST NUMBER! example:
If it says on your PC: 192.168.1.112
add +10 on the last 3 numbers of the IP: 192.168.1.122
*Gateway: put the numbers in JUST like you see it on the Dos prompt on the pc,
in your DS (mostly it's like 192.168.1.1))
*Subnetmask: SAME numbers as on your PC (mostly it is: 255.255.255.0 )
*Primary DNS (SAME numbers as on your PC)
*Secundary DNS empty. (SAME numbers as on your PC)
If there is no secundary DNS, just leave it empty.
Test it, if it says connection successfull, save it.
Shut down the DS, boot up Beup..
I hope this will fix your problem.
How do I run Beup with the Nintendo USB Wifi Stick?
Check out these links how to run wifi-Whomebrew with the Nintendo USB Wifi stick.